BODY STRUCTURE [PANEL REPLACEMENT]
09-80B–3
09-80B
FRONT BUMPER BRACKET INSTALLATION[PANEL REPLACEMENT]
id098008743200
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Tighten the bolts at section (A) to the specified torque and install the front bumper bracket.
Tightening torque
15.7—22.6 N·m {161—230 kgf·cm, 139—200 in·lbf}
End Of Sie
FRONT BUMPER
BRACKET
(A) BOLT
acxuub00000073
3419-1U-06C(09-80B).fm 3 ページ ２００６年３月２４日 金曜日 午後４時４７分
To Next Page
Loading...
