GENERAL INFORMATION
00-00–9
00-00
Use of Pulling Equipment
• When using pulling equipment, keep away from
the pulling area and use safety wires to prevent
accidents.
Prevent Short Circuits
• Turn the ignition switch to the LOCK position.
• Disconnect the battery cables.
• Securely connect the welding machine ground
near the welding area.
End Of Sie
EFFICIENT REMOVAL OF BODY PANELS
id000000600300
Body Measurements
• Before removal or rough-cutting, first measure the
body at and around the damaged area against
the standard reference dimension specifications.
If there is deformation, use frame repair
equipment to make a rough correction.
Safety wires
acxuub00000041
Battery cable
acxuub00000042
Ground
acxuub00000043
acxuub00000065
3419-1U-06C(00-00).fm 9 ページ ２００６年３月２２日 水曜日 午後４時１４分
To Next Page
Loading...
