Mazda CX-7 2011 - Page 79

BODY STRUCTURE [PANEL REPLACEMENT]
09-80B–55
09-80B
9. Weld the remaining weld locations, then install the center pillar reinforcement.
10. After temporarily installing new parts, make sure the related parts fit properly.
CENTER PILLAR
REINFORCEMENT
110mm
{4.33in}
150mm
{5.90in}
180mm
{7.09in}
ROUGH CUT AND
CUT-AND JOIN LOCATION
CUT-AND JOIN
LOCATION
CUT-AND JOIN
LOCATION
(B)3
3
L=60mm
{2.36in}
L=60mm
{2.36in}
(A)3
(A)3
80mm
50mm
t=1.2mm
REINFORCEMENT
{1.97in}
{0.05in}
{3.15in}
acxuub00000108
3419-1U-06C(09-80B).fm 55 ページ ２００６年３月２４日 金曜日 午後４時４７分