To Next Page

To Previous Page

Fold Feed Angle / Skew Adjustment:

Turn the feed angle adjustment knob to the right if the lower side

of the folded paper slants to the right.

Turn the knob to the left of the lower side slants to the left.

Note:

In cases other than single fold, put the folded paper face down on

Table 1 to make a feed angle adjustment.

Continuous folding:

Press the START/STOP key. The machine will fold the sheets

continuously.

Press the START/STOP key again while the machine is in

operation in order to stop feeding.

START/STOP Key

Batch Counting:

As each sheet is folded, the number indicated on the display

decreases by one.

Press the appropriate numerical key to select the number of

sheets to be folded.

Example:

Press the number “10” key twice to select 20.

Note:

The batch counting number is cancelled when the POWER is set

to OFF.

http://www.monomachines.com

Questions and Answers:

Need help?

Do you have a question about the MBM 206M and is the answer not in the manual?

MBM 206M Specifications

General