Fold Feed Angle / Skew Adjustment:
Turn the feed angle adjustment knob to the right if the lower side
of the folded paper slants to the right.
Turn the knob to the left of the lower side slants to the left.
Note:
In cases other than single fold, put the folded paper face down on
Table 1 to make a feed angle adjustment.
Continuous Folding:
Press the START/STOP key. The machine will fold the sheets
continuously.
Press the START/STOP key again while the machine is in
operation in order to stop feeding.
Subtraction Counting:
As each sheet is folded, the number indicated on the display
decreases by one.
Press the appropriate numerical key to select the number of
sheets to be folded.
Example:
Press the number “10” key twice to select 20.
Note:
The Subtraction counting number is cancelled when the POWER
is set to OFF.
To Next Page
Loading...
