MBM 306A User Manual

(7) Directions for Use
(A) Standard folding of standard-size paper
•F-45N
How to perform standard folding of
standard-paper
After the power switch is on…
Set the standard -size paper. Loosen the paper guide
setscrew and set the paper guide to fit the width of the
paper.
Place the paper on the paper feed table with its printed side
facing up (its printed side down in case of fold-out) after
neatly arranging it.
Make the paper guide closely contact the paper, and
tighten the setscrew.
< to next page>
•306A
How to perform standard folding of standard-paper
After the power is on …
Raise the paper feed table lever.
Set the standard-size paper. Loosen the paper guide
setscrew and set the paper guide to fit the width of the
paper.
Stack the paper on the paper feed table with its printed side
facing up (its printed side down in case of fold -out) after
neatly arranging it.
Make sure the paper guide closely contact the paper,
and tighten the setscrew.
Lower the paper feed table lever.
< to next page>
Setting the paper ejection roller (306A only):
Move the paper ejection roller to the position that fits
the size of paper being used.
-11-
http://www.monomachines.com
http://www.monomachines.com

MBM 306A Specifications

General

Brand	MBM
Model	306A
Category	Folding Machines
Language	English