24
121101
Standby Procedures
Whenever the grill is idle and product is not
being cooked, the upper platen must be
placed in the STANDBY position.
1. To place the upper platen in the
STANDBY position, press the STANDBY
button twice from the open position.
(See Figure 27.)
Figure 27
2. To raise the upper platen to the OPEN
position to resume cooking, press the
RAISE button. (See Figure 28.)
Figure 28
Note: If the grill remains idle for 5 continuous
minutes without being placed in STANDBY, a
tone will sound and the display will flash “PUT
GRILL IN STANDBY”.
CAUTION: NEVER USE FORCE TO
RAISE THE UPPER PLATEN. DAMAGE TO
COMPONENTS WILL RESULT. USE ONLY
THE RAISE BUTTON TO OPEN THE UPPER
PLATEN!
Cleaning After Each Run of Product
(Grills Using Lower Release Sheets)
Note: This manual contains separate
procedures for grills that use lower release
sheets and for grills that do not use lower
release sheets. Use the appropriate
procedures for your grill.
If your grill does not
use lower release
sheets, go to page 25.
1. Squeegee the lower release sheet from
front to back. (See Figure 29.)
Figure 29
2. Squeegee the upper release sheet from
top to bottom. (See Figure 30.)
Figure 30
3. Push the residue into the grease trough.
Note: Do not use excessive pressure when
wiping the release sheet with the squeegee.
Using excessive pressure can scratch or tear
the release sheet.
To Next Page
