EasyManua.ls Logo

McDonald's C832 - Page 28

McDonald's C832
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
160505
3. The next display will show the set point
temperatures, per the following example.
425 Set/Deg F 425
350 350 350
4. The display will then return to the selected
menu item.
To Change Product Cook Times
1. Press the
key to put the grill into the
Manual Mode.
2. Scroll to the menu item that requires a
change to the cook time by pressing the
or keys.
3. Press and hold the
key for 3-5
seconds.
4. Use the
key to increase the time
and the
key to decrease the time.
Each press of the key changes the time
by one second.
5. Press the
key to save the changes.
To Change a Menu Item
See “Product Selection” on page 22.
Probe Calibration
For grill markets that use lower release
material sheets, probe calibration is performed
with the release sheets installed. For grill
markets that do not use lower release material
sheets, probe calibration is performed without
the lower release sheets installed.
Thermocouple probes are located from front to
rear on the lower grill plates and upper
platens. Measurements should be taken from
front to back and left to right on all model grills.
See Figures 35 and 36 below, which identify
the probe locations.
Model C832
Figure 35
Model C834
Figure 36