42
37. Pour a small amount of lukewarm water
on a clean, sanitizer-soaked grill cloth
while holding it over the bottom grill
surface. Wipe the lower grill surface until
all residue is removed. (See Figure 96.)
Figure 96
38. Place the upper platen release sheets flat
on the lower grill surface. Gently clean
both sides of the sheets with the Kay Grill
Cleaning Pad Holder. (See Figure 97.)
Figure 97
39. Rinse both sides of the release sheets
with a clean, sanitizer-soaked grill cloth.
(See Figure 98.)
Figure 98
40. Re-install the release sheets. Secure the
sheets with the locking clips and bars.
(See Figure 99.)
Figure 99
Note: Reverse the cooking side of the
release sheets on a daily basis (example:
black side on odd days; grey or brown
side on even days).
41. Wipe the lower grill surface with a clean,
sanitizer-soaked grill cloth. Repeat until
no visible soil remains. (See Figure 100.)
Figure 100
42. Remove and empty the grease pans.
(See Figure 101.)
Figure 101
To Next Page
