McIntosh MA6700

20
IR Sensor receives
commands from a
Remote Control
STANDBY/ON Push-button
with indicator switches the MA/
MAC6700 ON or OFF (Standby)
and resets the microprocessors
VOLUME Control allows
adjustment of the listening level
for both channels.
TUNE tunes in radio stations.
It is also used in the setup mode
for various functions
Connection for dynamic
type headphones, for
private listening
MUTE Push-button mutes the
audio from the Loudspeakers
and Headphones
INPUT Control allows the selection
of various sources for listening and
recording.
TRIM allows selection of various
types of audio settings. It is also
used in the setup mode for various
functions
Meter indicates the
Right Channel Output
of the amplifier
LED indicates when the Left
Channel Amplifier POWER
GUARD circuit activates
Meter indicates the
Left Channel Output
of the amplifier
LED indicates when the Right
Channel Amplifier POWER
GUARD circuit activates
OUTPUT 1 and 2 Push-buttons with
indicators, switch Preamplifier Output
(Loudspeakers) 1 and 2 On or Off
INFORMATION DISPLAY
indicates the Sources, Vol-
ume, other Audio Settings,
Operational Functions and
Setup Mode Settings
TONE BYPASS Push-but-
ton with indicator, when
activated the audio signal
bypasses the Tone Controls