Need help?Do you have a question about the McIntosh MA9500 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Bypassable Tone Controls | Yes |
| Rear Panel IR Sensor Input | Yes |
| Power Output per Channel | 300 Watts |
| Frequency Response | 20Hz - 20kHz (+0, -0.5dB) |
| Damping Factor | 40 |
| Weight | 93 lbs |
| Speaker Impedance | 2, 4, or 8 Ohms |
| Rated Power Band | 20Hz - 20kHz |
| Phono Input | Yes |
| Headphone Output | Yes |
| Tone Controls | Yes |
| Power Control Output | Yes |
Encourages users to read the manual for optimal experience and safety.
Details requirements for custom cabinet installation, including spacing and ventilation.
Illustrates how to connect various audio sources and control devices to the amplifier's inputs.
Diagrams showing how to connect loudspeakers to the amplifier's output terminals.
Explains the function of the Input Control and Volume knobs for selection and adjustment.
Guides on using the Input Control and Volume Knobs for menu navigation and selection.
Instructions for entering, navigating, and exiting the Setup and Trim Functions menus.
Guides on turning the unit on/off and adjusting the volume level.
Explains how to select playback sources and adjust trim functions for input levels.
Explains Autoformer for speaker impedance and equalizer for frequency adjustment.
Guides on connecting for bi-amplification and using external power amplifiers.
Details output levels, impedance, sensitivity, and signal-to-noise ratios.
Lists input impedance for various inputs and maximum input signal handling.
Details power output, load impedance, frequency response, and distortion levels.
To Next Page
