Need help?Do you have a question about the McIntosh MC1.2KW and is the answer not in the manual?
General| Damping factor | 100 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 100000 Hz |
| Output impedance | 8 Ω |
| Audio output channels | 1.0 channels |
| Peak power per channel | 1200 W |
| Signal-to-Noise Ratio (SNR) | 124 dB |
| Total Harmonic Distortion (THD) | 0.005 % |
| Speakers connectivity type | Binding post |
| Purpose | Performance/stage |
| Product color | Black, Silver |
| Connectivity technology | Wired |
| LED indicators | Yes |
Weight and Dimensions| Depth | 558.8 mm |
|---|---|
| Width | 450.9 mm |
| Height | 312.7 mm |
| Weight | 66700 g |
Explanation of the rear panel connectors, including balanced/unbalanced inputs, power control, and speaker outputs.
Step-by-step guide for connecting loudspeakers using bare wire, banana plugs, or spade lugs, with safety warnings.
Explanation of the power output meter's operation (Watts, Hold, Lights Off) and the power switch functions (On/Off, Remote).
Overview of the MC1.2KW's advanced design, 1200W output, low distortion, and high current capabilities.
Explanation of the Double Balanced Push-Pull design, negative feedback, and component selection for low distortion.
Explanation of how Autoformers handle speaker loads, drive multiple speakers, and protect against circuit failure.
Explanation of the Power Guard circuit for preventing clipping and Sentry Monitor for transistor protection.
Detailed specifications including power output, load impedance, THD, dynamic headroom, and frequency response.
Specifications for input sensitivity, signal-to-noise ratio, intermodulation distortion, damping factor, and overall dimensions.
To Next Page
