23
Packing Instructions
Packing Instructions
In the event it is necessary to repack the MC2000
Amplifier for shipment, the equipment must be
packed exactly as shown below. It is very important
that the four metal feet are attached to the bottom of
the equipment. This will ensure the proper location of
the MC2000 on the bottom foam pad. The Vacuum
Tubes and Tube Cover must be removed from the
MC2000 Amplifier and packaged separately. Failure
to do this will result in shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If a
shipping carton or any of the interior part(s) are
needed, please call or write Customer Service De-
partment of McIntosh Laboratory. Please see the Part
List for the correct part numbers.
Power Amplifier Carton:
Quantity Part Number Description
1 033096 Poly bag
1 034097 Bottom foam pad
3 034098 Foam ring
1 034099 Top foam pad
1 034100 Carton Top
1 034101 Carton Bottom
4 018626 Metal foot
Accessory Carton:
Quantity Part Number Description
1 034109 Tube carton (gold)
with foam pads
1 034108 Inside carton (white)
1 034111 Outside carton (kraft)
1 034112 Foam pad set
Note: Refer to page 7 in this Ownerss Manual for a
view of the Accessory Carton.
To Next Page
Loading...
