Need help?Do you have a question about the McIntosh MHA150 and is the answer not in the manual?
Connecting to computers via USB and installing necessary software drivers.
How to enter and navigate the MHA150's setup menu.
Creating, renaming, and deleting custom headphone profiles.
Powering on/off, source selection, and volume control.
Using trim levels, balance, bass boost, and mono/stereo modes.
Connecting headphones, HXD®, and output control for listening devices.
Connecting to computers via USB and installing necessary software drivers.
How to enter and navigate the MHA150's setup menu.
Creating, renaming, and deleting custom headphone profiles.
Powering on/off, source selection, and volume control.
Using trim levels, balance, bass boost, and mono/stereo modes.
Connecting headphones, HXD®, and output control for listening devices.
General| Power Output | 50 Watts |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Input Impedance | 20 kOhms |
| Output Autoformer | Yes |
| Frequency Response | 20Hz - 20kHz |
| Headphone Impedance | 20 - 600 Ohms |
| Digital Inputs | 1 x USB, 1 x Coaxial, 1 x Optical |
| Headphone Output | 1/4" Headphone Jack |
| Type | Headphone Amplifier |
| Frequency Response (Headphone) | 20Hz - 20kHz |
| Signal to Noise Ratio | 100dB |
| Inputs | USB, Optical, Coaxial, RCA |
| Outputs | 1 Headphone |
To Next Page
