15
How to use the Remote Control
How to use the Remote Control
The supplied Remote Control performs the various
Operating Functions for the MHA150 Headphone
Amplifier.
Note: Refer to the “How to Operate” Section of this
manual for additional information.
Input Source Selection
Press the Push-button → to select the desired pro-
gram source.
Volume
Press the + or - Push-buttons to increase or de-
crease the listening level.
Mute
Press the (Mute) Push-button to mute the audio and
a second time to resume listening.
Select Push-Button
Press the Select Push-button to activate the TRIM
Mode. Then use the Directional Push-Buttons to select
a Trim Mode Function and make changes.
Directional Push-Buttons
After having pressed the SELECT Push-button,
press the ◄ ► (Left or Right) Push-buttons to scroll
through the various Trim Functions. Then press the
▲ ▼ (Up or Down) Push-buttons to make a change to
the current Trim Setting.
Note: If a contemporary McIntosh Tuner is used with
the MHA150 the ▲ ▼ (Up or Down) on the
Remote Control will allow for manual tuning of
stations. Refer to “General Information, note 6”
on page 4 for additional information.
Back and Next
When using an optional contemporary McIntosh
Tuner with the MHA150, select the next Station Preset
by pressing the : Push-button. Select the previous
Station Preset by pressing the 9 Push-button.
To Next Page
Loading...
