McIntosh MVP881BR

11
Rear Panel Connectors
Connect the MVP881BR power
cord to a live AC outlet. Refer to
information on the back panel of
your MVP881BR to determine
the correct voltage for your unit
OPTICAL and COAXIAL
DIGITAL AUDIO OUT-
PUTS send signals to a
Control Center with a D/A
Converter or a decoder
Y OUTPUT connects to the Y Component Input of
the TV/Monitor or other video component.
P
B
/C
B
OUTPUT connects to the P
B
/C
B
Component
Input of the TV/Monitor or other video component.
P
R
/C
R
OUTPUT connects to the P
R
/C
R
Component
Input of the TV/Monitor or other video component
S-VIDEO OUTput
supplies video signals
to a S Input of an A/V
Control Center or oth-
er video component
HDMI OUT 1 and OUT 2 supplies
digital video and digital audio sig-
nals to an Input of an A/V Control
Center or other audio/video com-
ponent
POWER CONTROL IN
receives turn-on signals from
a McIntosh component and
POWER CONTROL OUT
sends turn-on signals on to
another McIntosh Component
IR INput for
connecting an
IR Receiver
DATA IN receives
operating data
from a McIntosh
Control Center
RS-232C connector
for connection to
a remote control
device
VIDEO OUTput sup-
plies video signals
to connect to a Com-
posite Input of an
A/V Control Center
or other video com-
ponent
UNBALANCED AUDIO
OUTPUTS supply Seven
Channels of analog audio
and connects to the External
Input of an A/V Control
Center
UNBALANCED
AUDIO OUTPUTS
supply Two Channels
of Analog Audio and
connects to the Analog
Input of an A/V Con-
trol Center
BALANCED
AUDIO OUTPUTS
supply two channels
of analog audio to
connect to Balanced
Inputs of other com-
ponents
ETHERNET
Network Connector
for connecting the
MVP881BR to a
Broadband Ethernet
Network