SA-CD Audio Out
●On
Off On, the MVP881BR converts the SACD Disc native DSD (Direct Stream
Digital) signal to multichannel or 2CH PCM via the HDMI Output. Off,
sends no audio signal via the HDMI Output.
HDMI Control
Control
●Off, HDMI 1 On,
HDMI 2 On
When TVs with HDMI External Control Capabilities are activated some of
the basic functions of the MVP881BR may be controllable via the TV Re-
mote Control. Contact the TV manufacturer for additional information.
Power Off Control
●On, Off
When TVs with HDMI External Control Capabilities are activated the
MVP881BR may be switched On/Off via the TV Remote Control. Contact
the TV manufacturer for additional information.
Video Setup
TV Aspect
●16:9 Squeeze Auto
WIDE (16:9), 4:3 PS, 4:3LB 16:9 Squeeze Auto displays both HD and SD signals with the incoming as-
pect ratio. WIDE (16:9) displays HD signals with the incoming aspect ratio,
SD signals aspect ratio is changed to fill up the 16:9 screen. 4:3 PS (Pan and
Scan) retains the 4:3 aspect ratio for a 4:3 TV/Monitor, a 16:9 TV/Monitor
will display the 4:3 image centered, with vertical Black Bars on either side.
4:3 LB will display 480i source material with Black Bars on Top and bottom
of the image.
Component Resolution
●480/576i
480/576P, 720P, 1080i;
Source Direct
Sets the video signal resolution available at the Component Video Out Jacks.
Source Direct if the Disc contains a 1080P video signal, it will be converted
to a 1080i video signal.
Progressive Mode
●Auto
Video1, Video2 Auto setting automatically detects the type of the signal (Video or Film based
material) and process accordingly. Video1 is a manual setting for playing pri-
marly Video based material. Video 2 is a manual setting for playing primarly
lm based material.
TV Active Area
●Full
Normal Full setting for use with TV/Monitors intended for home use. Normal setting
for use with TV/Monitors intended for professional broadcast use. (affects the
horizontal display range when the resolution is set to 480i/576i).
Audio Setup
Downmix
●Lt/Rt
Stereo Lt/Rt down converts various multichannel signals (such as Dolby Digital,
DTS HD) to a 2 Channel PCM Signal.
1
The 7.1 ch Audio Out Menu Selection will be “grayed out” until the HMDI Setup, Audio Setup,
Menu Selection is set to “Mute”.
To Next Page
Loading...