Auto Power Mode
●Off
On Off, the MVP881BR will stay on until switched Off. On, will automatically
switch power Off about 30 minutes after disc playback has ended, a disc is
not loaded or when disc playback is stopped.
Power Saving
●Power Saving
Standby
Normal Standby, HDMI Con-
trol Mode, Quick Start Mode
Power Saving Standby, consumes the least amount of power and does not
respond to HDMI or RS232 remote commands. Normal Standby, consumes
more power than the “Power Saving Standby” Mode and responds to RS232
remote commands and does not respond to HDMI remote commands. HDMI
Control Mode, consumes more power than the “Normal Standby” Mode and
responds to HDMI and RS232 remote commands. Quick Start Mode, fastest
start up with power consumption almost the same as when the MVP881BR is
On and Front Panel Nomenclature will be illuminated.
Note: The “Quick Start Mode” is not intented for normal operation and
is not recommended for long term use.
BD Data Utility - BD Data Erase, Initialize SD
Card
Please refer to page 18 for additional information.
To Next Page
Loading...