Figure 88
Firmware Update
4. Press the Right Directional Push-button and a
new menu will appear. Refer to figure 84. Then
press Down Directional Push-button followed
by the SELECT Push-button to Check for the Up-
date. Figure 85 will briefly appear on the screen,
followed by figure 86 or 87.
Note: If an error message appears on the screen
the MVP881BR was unable to establish a
connection with the Internet, try resetting the
Routers/Modem and then try again.
5. If figure 86 appears on screen press the SELECT
Push-button and you will be returned to the Other
Setup Menu. If figure 87 appears on the screen an
Update is available. To perform the update now,
use Down Directional Push-button to select Up-
date then press the SELECT Push-button to start
the Update Process. Refer to figure 88.
6. Press the Left Directional Push-button and the
Yes Push-button Icon will be highlighted. Refer to
figure 89. Press the SELECT Push-button to start
the process. Refer to figures 88 and 89 on the next
page.
During the first part of the download and update
process the TV/Monitor will display the progress.
Refer to figures 90 and 91 on the next page. At some
point during the download and update process the TV/
Monitor screen will go blank, this is normal. Do not
remove AC Power or attempt to operate the MVP-
881BR. The MVP881BR will also switch power Off
and On during the process.
The Update Process is complete when the Front
Panel Information Display indicates “NO DISC”. Re-
sume normal operations at this time.
To Next Page
Loading...