Figure 12
10. Press the SELECT Push-button to begin Initial-
izing the card. Refer to figure 12.
11. Using the Directional Push-buttons return to the
Other Setup Menu and Icon.
Note: All of the remaining Setup Mode Menu Op-
tions are performed in a similar manner.
12. After all the desired setup adjustments are com-
plete, press the SETUP Push-button to exit the
Setup Mode.
Notes: 1. Some changes made to the menu options
will not occur until after the SETUP Mode
has been exited.
2. A dot located to the left of the Menu Set-
ting Name indicates the current active
setting.
Introduction to the MVP881BR Setup Mode
Additional Setup Options
For the vast majority of MVP881BR Owners the De-
fault Settings and Suggested Component Connections
are all one needs for full enjoyment of movies and still
photos.
The MVP881BR has a number of additional op-
tions allowing intergration into your Home Theater
System. Usually, your McIntosh Dealer and/or Custom
Installer uses these additional capabilities.
The navigation and selection methods previously
illustrated also apply to the remainder of Setup Mode
Settings, which resumes on page 22.
To Next Page
Loading...