McIntosh MVP881BR

25
MAIN MENU SUB MENU SELECTION OPTION(S) DESCRIPTION
Audio Setup
A
HDMI
Subwoofer Mode
●LFE
LFE+Main LFE setting allows the low frequency signal from the channels with Speaker
Conguration set to Small to be sent to the Subwoofer. The LFE+Main set-
ting allows the low frequency signal from all of the channels to be sent to the
Subwoofer regardless of the Speaker Conguration size selection.
Source Direct
●Off
On:50kHz, On:100kHz Off activates the current Speaker Conguration Settings. On:50kHz set-
ting changes the Speaker Conguration Settings to all large Loudspeakers,
Subwoofer On and with the frequency response up to 50kHz. On:100kHz
setting changes the Speaker Conguration Settings to all large Loudspeak-
ers, Subwoofer On and with the frequency response up to 50kHz. With either
setting (50kHz or 100kHz) the subwoofer output increases by 5dB and 15dB
when playing SACD Discs.
Compression
●Auto
Off, Low, Middle, High Auto compresses the dynamic range of the Audio Signal. Switches Off com-
pression of the Audio Signal. Low, Middle, High sets the degree of dynamic
range compression of the audio signal.
AFDM
●On
Off, MTRX On, automatically sets the surround mode using the ID information contained
on some discs. Off, does not respond to the ID information contained on some
discs. MTRX, creates surround sound by the matrix process for all discs.
BD Effect Sound
●On
Off On, provides click sounds when navigating thru Blu-ray disc menu items.
Off, provides no click sounds when navigating thru Blu-ray disc menu items.
BD Re-Encoder
●Auto
Dolby Digital, DTS Auto, selects the same type (Dolby Digital or DTS) as the primary sound
track when re-encoding the audio mix of the primary and secondary sound
track and is available at the MVP881BR Optical and Coax Outputs. Dolby
Digital, is the type of re-encoding of the audio mix signal, regardless of the
primary sound track type. DTS, is the type of re-encoding of the audio mix
signal, regardless of the primary sound track type.
Digital Out
●Bitstream
PCM, PCM Down Sampling Bitstream, passes the primary sound track original signal type (such as Dolby
True HD, Dolby Digital Plus and DTS Master HD) to the HDMI Outputs and
down decodes those formats to Dolby Digital or DTS signal type for avail-
ablity at the Optical and Coaxal outputs. PCM, decodes all types of Dolby
Digital and DTS audio signals and sends them out as a 2 channel PCM Digi-
tal Signal. PCM Down Sampling, also decodes Dolby Digital and DTS audio
signals into 2 channel PCM, if the sampling frequency of the signal is greater
than 48kHz the signal will be down sampled to 48kHz.
Setup Mode, con’t