McIntosh MVP881BR

33
How to Operate the MVP881BR, con’t
MP3/WMA Audio Playback
The MVP881BR will display the Folder Structure
and Tracks from a CD Disc with MP3 format to make
the song selection process easier. To play a MP3 disc
perform the following steps:
1. Load a MP3/WMA Disc into the MVP881BR,
about 5 to 20 seconds later a Disc Information
will appear on the Monitor/TV indicating the
Folder/Tracks Organization of the Disc. Refer to
figures 42 and 43.
2. Use the Right or Left / Up or Down direc-
tional Push-buttons to highlight the desired Folder
or Track followed by pressing the SELECT Push-
button. If a Folder was selected, use the direction-
al push-buttons to select the desired Track within
the folder, then push the SELECT Push-button.
The selected Track will now start playing.
Note: The Column on the left side of the Disc Infor-
mation Screen indicates any folders on the
Disc. The right side column indicates Tracks
located in the open Folder. The basic trans-
port functions such as Next, Back, Fast-For-
ward, Reverse, Stop, Pause, Play and Random
Playback continue to function as normal. The
Next and Back Push-buttons will select Tracks
within the current folder. To play Tracks in
other Folders, use the direction push-buttons
to select the desired folder first.
JPEG Photo CDs
The MVP881BR will display the Folder Structure
and Photos from a CD Disc with JPEG file format. To
view a JPEG Photo disc perform the following steps:
1. Load a JPEG Disc into the MVP881BR, about 5
to 20 seconds later a Disc Information will appear
on the Monitor/TV indicating the Folder/Photo
Organization of the Disc. Refer to figure 42.
2. Use the Right or Left / Up or Down direc-
tional Push-buttons to highlight the desired Folder
or Photo followed by the pressing the SELECT
Push-button. If a Folder was selected, use the di-
rectional push-buttons to select the desired Photo
within the folder, then push the SELECT Push-
button. The selected Photo will appear now.
Notes: The column on the left side of the Disc
Information Screen Icon indicates any folders
on the Disc. The right side column indicates
Photos located in the open Folder. The basic
transport functions such as Next, Back,
Stop, Pause and Play continue to function as
normal. The Next and Back Push-buttons will
select Photos within the current folder. To
view Photos in other Folders use the direction
push-buttons to select the desired folder first.
Reset of Microprocessors
In the unlikely event the controls of the MVP881BR
stop functioning, the microprocessors can be reset by
performing one of the two methods listed below:
Method One
Press and hold in the Front Panel PLAY Push-
butt immediately followed by the STANDBY/
ON Push-button and release both Push-buttons
when the LED above the STANDBY/ON Push-
button is extinguished.
Method Two
Remove AC Power from the MVP881BR for at
least 15 seconds, then reapply AC Power to the
MVP881BR.