McIntosh MX120

10
INPUTS for analog
audio signals from a
TAPE, VCR 1, DVD,
TV, SAT, CD (2),
PHono/AUX or Tuner
components
Rear Panel Audio and Digital Audio Connections
MULTI-CHANNEL
AMPlifier connector
accepts a 25 conductor
cable that connects all
audio and power con-
trol signals to a McIn-
tosh Power Amplifier
DIGITAL INPUTS SAT,
CD(2) and AUX receive
a digital audio signal
from the Optical Output
of a component
DIGITAL INPUTS
TAPE, DVD and TV
receive a digital audio
signal from the Co-
axial Output of a com-
ponent
The eight channel
EXTERNAL IN-
PUTS accept audio
signals from a com-
ponent or external
processor
ZONE A OUTPUTS
send all eight audio
channel signals to
power amplifier in-
puts
RECord OUTPUTS
supply analog audio
record signals for
recorders
DIGITAL OUTPUTS both
optical and coaxial, provide a
digital audio signal to an ex-
ternal digital processor
ZONE A FIXED OUTPUTS
send a fixed line level, two
channel analog signal as
selected by the INPUT Zone
A Control
ZONE B OUTPUTS
send a two channel
signal from the ana-
log inputs as selected
by the INPUT Zone
B Control
ZONE A BALANCED
OUTPUTS contain the
program signals for
Right, Center and Left
Front Channels
BALANCED INPUTS
for two channel
component sources
(Zone A only)