McIntosh MX120

12
Home Controller
McIntosh Audio Video Player
How to Connect Data and Power Control
IR Sensor
1. Connect a Data Control Cable from the MX120 DVD
(Input 5) Data Port to the McIntosh Audio/Video Player
Data In Jack.
Note: By adding a McIntosh Remote Control Translator to
the MX120, non McIntosh Source Devices such as a
Satellite Receiver can be remotely controlled using a
McIntosh Remote Control and Keypads.
2. Connect a Data Control Cable from the MX120
TUNER Data Port to the McIntosh AM/FM Tuner
Data 1 In Jack.
3. Connect a Data Control Cable from the MX120 HOME
Data Port to the Home Controller Data In Jack.
4. Connect a 4 conductor shielded cable from the MX120
ZONE A KEYPAD Socket to a McIntosh WK-4 Key-
pad.
How to Connect Data and Power Control
5. Connect a Power Control Cable from the MX120
POWER CONTROL ACC Jack to the McIntosh Audio
Video Player Power Control In Jack.
6. Connect a Power Control Cable from the MX120 Audio
Video power Control Out Jack to the McIntosh AM/FM
Tuner Power Control In Jack.
7. Connect a Power Control Cable from the MX120
POWER CONTROL A Jack to the McIntosh Powered
Subwoofer Power Control In Jack.
8. Connect a Power Control Cable from the McIntosh
Powered Subwoofer Power Control Out Jack to the
McIntosh Power Control AC Outlet Strip Power Con-
trol Jack.
9. Optionally, connect a Data Control Cable from the
MX120 IR INPUTS A to an external IR Sensor.
McIntosh Keypad
McIntosh
Power
Control
McIntosh
Powered Subwoofer
McIntosh AM/FM Tuner