McIntosh MX120

33
Menu, followed by pressing the Right directional
push-button to select the PHON. Refer to figure 20.
20. Using the Up or Down directional push-buttons,
select TITLE, followed by pressing the SELECT/OK
Push-button. The On-Screen Menu Title can now be
changed from the default name.
21. Using the Up or Down directional push-buttons,
select “P” as the first character of the new title.
22. Press the Right directional push-button to select the
second character position of the title.
23. Using the Up or Down directional push-buttons
to select “H” the second character of the title.
24. Select the two remaining characters “O” and “N” of
the title by using the directional push-buttons.
25. Press the SELECT/OK Push-button once and then
press the Down directional push-button.
26. Continue next to the SURR MODE Input Setting. If
you do not wish to perform SURR MODE Input Set-
ting at this time, proceed to the Video Power.
Surround Mode
By default, the MX120 will remember the last Surround
Mode Setting for each input. It is also possible to assign a
Default Surround Mode for each Input, so every time that
Input is selected the Surround Mode will be the default set-
ting instead of the last selected Surround Mode for the in-
put. Refer to figure 21 on page 34.
27. Using the Up or Down directional Push-buttons,
select SURR MODE from the On-Screen Menu, fol-
lowed by pressing the Left or Right directional
Push-buttons to select the CINEMA 1 Surround
Mode for DVD Input instead of the default setting of
LAST.
28. Continue next to the VIDEO POWER Control. If you
do not wish to perform VIDEO POWER Control Ad-
justments at this time, proceed to the Component
Video Input.
Video Power
The MX120 has a VIDEO POWER CONTROL Jack and
its activation is controllable by selecting any one of the
Analog Audio/Video Inputs. By default all eight Analog Au-
dio/Video Inputs have the VIDEO POWER feature set to
the ON Position. In the following example, the VIDEO
POWER Settting for the new DVD2 Input will be switched
Off.
29. Using the Up or Down directional push-buttons,
select SOURCE INPUT from the On-Screen Menu,
followed by pressing the Left or Right direc-
tional push-buttons to select the DVD2 Input Num-
ber 4.
30. Using the Up or Down directional push-buttons,
select VIDEO POWER on the On-Screen Menu, fol-
lowed by pressing the Left or Right directional
push-buttons to select OFF. Refer to figure 22 on
page 34.
31. If you do not wish to perform HDMI VIDEO Input
Adjustments at this time, proceed to Component
Video and Video Converter Input.
SETUP, con’t
Figure 20
MENU: INPUT SETUP
SOURCE INPUT 1 - IR-PH/AUX
TITLE PHON
DIGITAL INPUT NONE
ÆZONE A ANALOG INPUT PHON
SURR MODE LAST
VIDEO POWER ON
HDMI VIDEO NONE
COMPONENT VIDEO NONE
MAIN MENU
Figure 19
MENU: INPUT SETUP
SOURCE INPUT 5 - IR-DVD
TITLE DVD1
DIGITAL INPUT COAX E LK
ÆZONE A ANALOG INPUT BAL1
SURR MODE LAST
VIDEO POWER ON
HDMI VIDEO 4
COMPONENT VIDEO 5
MAIN MENU