www.mdcusa.com Ph: 833 632 8721
46
Pressure relief valve
Scalding injury from hot water and/or tampering with the pressure relief valve!
• Never actuate the pressure relief valve as long as the appliance is still hot.
• Do not place a plug or reducing coupling on the outlet part of the valve.
WARNING
• The pressure relief valve is a safety component and must not be removed for any reason other
than replacement.
• The pressure relief valve is not serviceable; if defective, it must be replaced.
• It must be replaced by a Truma pressure relief valve rated for 100 psi (6.9 bar) that is CSA-certied and
registered.
• It must be replaced by a Truma certied service technician.
• Tampering with the pressure relief valve will void the warranty.
The appliance is equipped with a pressure relief valve (Fig. 3) that complies with the standard for Relief Valves
for Hot Water Supply Systems, ANSI Z21.22
4: Pressure relief valve
4a: Lever in “Valve closed during operation” position
4b: Lever in “open” position
To Next Page
Loading...
