MDC ROBSON XTT - Winterizing the RV with Winterizing Fluid

www.mdcusa.com Ph: 833 632 8721
55
Winterizing the RV with a winterizing uid
• Winterizing the RV with a winterizing uid is only possible with an installed bypass kit (not in scope
of delivery)
• Refer to “Connection diagrams” in manufacturers booklet for all letters referred to in the following
description.
Winterizing AquaGo basic/ AquaGo comfort
1. Close valves A and B.
2. Open valve C.
3. Drain the appliance (“Draining the water and cleaning the water inlet lter” on page 56).
4. Flush the RV’s water system with a suitable winterizing uid according to the supplier’s or RV manufacturer’s
guidelines.
Winterizing AquaGo comfort plus
1. Close valves A, B and E.
2. Make sure that valve D remains in the closed position.
3. Open valve C.
4. Drain the appliance (“Draining the water and cleaning the water inlet lter” on page 56).
5. Flush the RV’s water system with a suitable winterizing uid according to the supplier’s or RV manufacturer’s
guidelines.
6. Close all faucets (if open).
7. Open valve D.
8. Wait until winterizing uid has drained. Collect escaping uid in a suitable vessel.
9. Close valve D.
Maintenance
Repairs must be performed by a certied service technician. Truma recommends that the appliance be serviced annually
by a certied service technician. Verify proper operation after servicing.
High temperatures or repair attempts while the gas supply is turned on may
result in scalding injuries!
• Turn OFF the electrical power supply and the LP gas supply before starting
maintenance and repair work.
• Allow the appliance to cool down.
• Never actuate the pressure relief valve as long as the appliance is still hot.
WARNING