EasyManua.ls Logo

MDC ROBSON XTT - Draining the Water and Cleaning the Water Inlet Filter

MDC ROBSON XTT
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.mdcusa.com Ph: 833 632 8721
56
Draining the water and cleaning the water inlet lter
To keep the appliance fully functional, clean the water inlet lter at least once a year.
1. AquaGo comfort / AquaGo comfort plus
Set the control panel to “Off.
2. Remove the access door (refer to “Removing the access door” on page 48).
3. Switch OFF the appliance at the POWER switch.
4. Open all hot water faucets and wait for cold water. This will ensure that hot water is removed from the
appliance before draining.
5. Turn OFF the water supply or switch OFF the water pump.
6. Leave the hot water faucets open in order to depressurize and vent the water system.
Injuries caused by the Easy Drain Lever!
Never actuate the Easy Drain Lever as long as the appliance is under water
pressure and/or is still hot.
CAUTION
Sharp edges can cause cuts and injury!
Always wear protective gloves to avoid injuries from sharp edges during
maintenance work.
CAUTION

Table of Contents

Related product manuals