EasyManua.ls Logo

MDC ROBSON XTT - Page 76

MDC ROBSON XTT
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.mdcusa.com Ph: 833 632 8721
76
Every 6 MONTHS / 3000 miles SERVICE CHECKED
Hitch
Check hitch bolts to 90Nm/66ft lb
Lubricate
Handbrake Check cable and adjust if necessary
Hand winch Check brake function and webbing
Suspension
Torque bolts to 190Nm/140ft lb
Grease bushes and check for play.
Check retaining chain shackles tight.
Inspect shock absorber for condition.
Inspect shock absorber bushes.
Brakes Inspect and adjust. Check lining thickness and drum wear.
Wheel bearings Remove, clean and re-lubricate. Inspect for wear and replace if necessary
Wheel nuts
Inspect condition and torque to (125Nm/92ft lb ½” studs)
(140Nm/103ft lb 14mm studs alloy rims) (200Nm/148ft lb 14mm studs
steel rims)
Tires Inspect for abnormal wear, damage, and pressure.
Lights Check all lights are functioning
Battery Check terminals and voltage at full charge
Seals
Check condition and correct latch/ lock adjustment for correct 30-50%
compression.
General xings Check all structural xings are secure
Seals & Latches
Check all seals on doors and hatches compress 30-50%. All seals in
serviceable condition and free of damage.
Suspension
Grease bushes and check for play.
Check torque on suspension hanger bolts (190nm/140 ft lb)
Check retaining chain shackles tight.
Service Center Notes

Table of Contents

Related product manuals