www.mdcusa.com Ph: 833 632 8721
96
110 volt Electrical
GFI Unit Check operation of GFI Safety Switch via test button
Mains Input Inspect 110v input plug and cover are free of damage
Earthing Carry out resistance check
Trailer Body
Hatches & Doors Check and lubricate locks
Seals
Check condition and correct latch/ lock adjustment for correct 30-50%
compression.
Body
Inspect joint sealants inside and out.
Inspect for soft spots on oor (Timber Floor Models).
General xings Check all structural xings are secure.
Ventilation Inspect for obstruction and vents operating correctly.
Fire Extinguisher Inspect extinguisher is charged and within service date.
Smoke Alarm
Test and inspect.
Replace battery.
Damp Check Inspect trailer for any dampness.
Plumbing
Hot Water System De-scale hot water service (if installed)
Water Tanks Treat tanks and entire system with bacteria killing tank cleaner and ush.
Water System
Inspect for leaks. Turn on pump and ensure it doesn’t start due to loss of
pressure.
Service Center Notes
To Next Page
Loading...
