Meaco 25L - Wiring Instructions; Mains Lead Colour Code; Plug Wiring Procedure

3 [EN]
Wiring Instructions: Should it be necessary to change the plug please note the wires in the mains
lead are coloured in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
GREEN AND YELLOW – EARTH
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
1. The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked with the letter N
or coloured BLACK.
2. The BROWN wire is the LIVE and must be connected to the terminal which is marked with the letter L or
coloured RED.
3. The GREEN/YELLOW is the EARTH and must be connected to the terminal which is marked with the
letter E or coloured GREEN OR GREEN/YELLOW.
4. Always ensure that the cord grip is positioned and fastened correctly.
If a 13A (BS1363) fused plug is used it must be fitted with a 13A fuse. If in doubt consult a qualified
electrician.
Wiring for a 13Amp Plug (BS1363)
Please note. The Earth Terminal is marked with the letter E or Earth Symbol .
Earth – E (Green / Yellow)
Live – L (Brown)
13 amp Fuse
Neutral – N (Blue)