How to fix a Meaco 25L that does not turn on?
If your Meaco Dehumidifier isn't turning on, first ensure that the unit is properly plugged into a working power outlet. Then, check if the power switch is turned ON.
What to do if my Meaco 25L Dehumidifier is beeping 10 times?
If your Meaco Dehumidifier is beeping ten times, it means the water tank is full. Simply empty the water tank to resolve the issue.
Why is my Meaco 25L not collecting water?
Your Meaco Dehumidifier might not be collecting water for several reasons. It could be due to: * Ambient temperature being too low (below +5°C) or too high (above 35°C). * Ambient air humidity being lower than 45%rh. * A dirty or blocked air filter, which requires replacement. * The relative humidity set point being lower than the current humidity; this is normal and not a fault.
Why is the compressor not running on my Meaco Dehumidifier?
If the compressor on your Meaco Dehumidifier isn't running, it could be for one of two reasons: either the dehumidifier has just been turned on and you need to wait 3 minutes for the compressor to start up, or the unit is in defrost mode, indicated by a defrost symbol on the display, which is normal.
What to do if the fan is not running on my Meaco Dehumidifier?
If the fan isn't running on your Meaco Dehumidifier, it might be normal if the relative humidity is below the set point. Also, ensure that the device is only set up in rooms with temperatures above +5°C.
General| Brand | Meaco |
|---|---|
| Model | 25L |
| Category | Dehumidifier |
| Language | English |
Covers child safety, grounding, power cord, stable surface, water, and electrical components.
Details the standard colour coding for mains lead wires.
Step-by-step guide for connecting wires to a plug.
Details the different drying modes like Humidistat, Laundry, Quiet, and Auto.
Provides solutions for common problems like unit not operating or poor dehumidification.
To Next Page
