To Next PageTo Next PageWhy is my Meaco Dehumidifier leaking water?
If the Meaco Dehumidifier is leaking water, ensure it's on a level surface. Also, a dirty filter can cause this issue, so ensure you clean the filter regularly. Check the water bucket for cracks by filling it with water and placing it on kitchen paper.
Why is the alarm light flashing on my Meaco Dehumidifier?
If the alarm light is flashing on your Meaco Dehumidifier, clean the filter and ensure the unit is more than 30cm from a wall to ensure proper airflow.
Describes the power indicator light.
Indicates a full water tank or incorrect fitting.
Alerts to operational faults, such as blocked airflow.
Allows selection of low, medium, or high fan speeds.
Sets target relative humidity to 40% for faster drying.
How to set up and start the unit for the first time.
Guidance on optimal placement for effective dehumidification.
Key safety points during operation to prevent hazards.
Instructions for setting up continuous drainage via a hose.
General| Type | Desiccant |
|---|---|
| Weight | 6.4 kg |
| Water Extraction | 8 liters per day |
| Power Consumption | 650W |
| Operating Temperature | 1°C - 37°C |
| Airflow | 115 m³/h |
| Water Tank Capacity | 2 liters |
| Dimensions | 351mm (h) x 188mm (w) x 500mm (l) |
