Measuretek EHC-C-3 - Page 5

EHC-C
Button
Turns the scale on / If scale is on, sets
Turns the scale off
Exists the Setup, Calibration or other modes
Performs a tare operation
Changes unit of measure
Confirms the operation
Adds accumulation values to memory
Reviews accumulation times and totals
Sends output data via RS232 port
Clears the input number or accumulated value
Stores a piece weight or tare weight and its unit of measure
Recalls a stored piece weight or tare weight and its unit of measure
Inputs the Hi and Lo
Enters piece weight calculation mode
~
Enters a number
+
Enters calibration mode
+
Enters LED brightness setup mode
+
Enters auto-
off time setup mode
+
Enters display ACD inner code or working voltage mode
+
Enters
RS232 parameter setup mode
+
Enters date and time setup mode
+
Enters ID setup mode
+
Enters
business name setup
www.easthigh.com.cn
Function
Turns the scale on / If scale is on, sets
zero
Turns the scale off
(Long press)
Exists the Setup, Calibration or other modes
Performs a tare operation
Changes unit of measure
Confirms the operation
Adds accumulation values to memory
Reviews accumulation times and totals
(Long Press)
Sends output data via RS232 port
Clears the input number or accumulated value
(Long Press)
Stores a piece weight or tare weight and its unit of measure
Recalls a stored piece weight or tare weight and its unit of measure
Inputs the Hi and Lo
quantity limits
Enters piece weight calculation mode
Enters a number
Enters calibration mode
Enters LED brightness setup mode
off time setup mode
Enters display ACD inner code or working voltage mode
RS232 parameter setup mode
Enters date and time setup mode
Enters ID setup mode
business name setup
mode
3
Recalls a stored piece weight or tare weight and its unit of measure