Mebay DC30D - Protection Functions; Technical Parameters

DC30D GENSET CONTROLLER USER MANUAL
5
 Generator Frequency Hz
 Generator active power KW
 Successful start Times
 Current running time
 Total running time
 Classes maintenance notice
Protection
 Over speed
 Under speed
 Low oil pressure
 High temperature
 Low fuel level
 External emergency alarm
 Sensor Open
 Over Frequency
 Under Frequency
 Over voltage
 Under voltage
 Over current
 Maintenance expire
 Low water level alarm
 Emergency Stop
 Crank failure
 Stop Failure
 Over battery voltage
 Under Battery voltage
Parameters
Options
Parameters
Operation Voltage
DC8-36V Continuous
Power Consumption
Standby：24V：MAX 1W
Working：24V：MAX 2W
AC Voltage Input
1P2W(L-N input) 30VAC-360VAC(ph-N)
Rotate speed sensor
Frequency
50-9000Hz
Generator Frequency input
50/60Hz
MAX Accumulating Time
9999.9Hours（Min Store time:6min）
Fuel Relay Output
1Amp DC+VE Supply voltage
Start Relay Output
1Amp DC+VE Supply voltage
Programmable Relay output 1
1Amp DC+VE Supply voltage