ITEM PART NO. QTY DESCRIPTION
"2033ES / 2633ES" Service & Parts Manual - ANSI Specifications October 2008
Page C-19
LIFT CYLINDER AND EMERGENCY LOWERING CABLE W/ BELL CRANK
NOTE: 80802 Cylinder w/ Bell Crank Assembly (items 14–16)
can be replaced by 91056 Cylinder w/o Bell Crank
Assembly and 16062 Lift Cylinder Valve Guard. All
other parts are interchangeable.
1 90802 1 CYLINDER, LIFT
2 REF 1 HOSE ASSY (SEE SECTION D)
3 HDW7438 1 FITTING, PIPE, ADAPTOR
4 90439 1 ORIFICE
5 6984 4 BEARING, DU, 1 3/8" ID X 1 5/8" LG
6 90815 1 VALVE, 2 WAY, N.C. W/MANUAL LOCK
7 90001 1 COIL, 24 VOLT, DOUBLE SPADE W/DIODE
8 HDW8879 1 FITTING, PIPE 90°, MALE BARB
9 90638 1 KIT, SEAL-LIFT CYLINDER (SERVICE)
10 REF 16' HOSE, RETURN LINE (SEE SECTION D)
11 7788 1 CLAMP, HOSE
— REF 1 HARNESS, WIRE DOWN, VALVE (SEE PARTS SECTION A)
12 91104 1 CABLE, 80 IN, 2033ES
12 91082 1 CABLE, 100 IN, 2633ES
12A — 1 SPRING
12B — 1 CAP LUG
13 8152 2 BOLT
14 16117 1 WELDMENT, CABLE MOUNT ATTACHMENT
15 16121 1 BELL CRANK
15A — 1 CLEVIS PIN
15B — 1 COTTER PIN
16 16134 1 E-DOWN PIVOT NUT
To Next Page
Loading...
