October 2008 "2033ES - 2633ES" Service & Parts Manual - ANSI Specifications
Page F-8
ART_2339
Platform Labels | 2033ES - 2633ES
90718
90736
90829
90722 90721
90730
90733
(2033ES)
(2633ES)
(Inside Manual Case)
8606
OPTION
8805
OPTION
(6X)
(INSIDE PLATFORM AREA)
TIP-OVER HAZARDS
YOU MUST NOT OPERATE
THIS MACHINE:
DO NOT DRIVE NEAR DROP-OFFS, HOLES
OPEN ELEVATOR SHAFTS, AND LOADING DOCKS
DO NOT ELEVATE PLATFORM ON
UNEVEN OR SOFT SURFACES
DO NOT DRIVE ONTO UNEVEN OR
SOFT SURFACES WHEN ELEVATED
DO NOT RAISE PLATFORM ON SLOPE, OR DRIVE
ONTO SLOPE WHEN ELEVATED
DO NOT RAISE PLATFORM IN
WINDY OR GUSTY CONDITIONS
DEATH OR SERIOUS INJURY
WILL RESULT FROM IMPROPER
USE OF THIS EQUIPMENT
DEATH OR SERIOUS INJURY
WILL RESULT FROM CONTACT
OR INADEQUATE CLEARANCE
90721
ELECTROCUTION HAZARD
THIS MACHINE IS NOT INSULATED
UNLESS YOU HAVE BEEN AUTHORIZED TO
USE AND TRAINED IN THE SAFE OPERATION
OF THIS MACHINE.
TRAINING INCLUDES COMPLETE KNOWLEDGE OF
THE SAFETY AND OPERATION INSTRUCTIONS
CONTAINED IN THE MANUFACTURERS MANUAL,
ANSI MANUAL OF RESPONSIBILITIES, YOUR
EMPLOYERS WORK RULES AND APPLICABLE
GOVERNMENTAL REGULATIONS.
AN UNAUTHORIZED AND UNTRAINED OPERATOR
SUBJECTS THEMSELF AND OTHERS TO
DEATH OR SERIOUS INJURY.
MAINTAIN SAFE CLEARANCE FROM ELECTRICAL
LINES AND APARATUS. YOU MUST ALLOW FOR
MACHINE SWAY, ROCK OR SAG AND ELECTRICAL
LINES SWAYING.
THIS MACHINE DOES NOT PROVIDE PROTECTION
FROM CONTACT WITH OR PROXIMITY TO AN
ELECTRICALLY CHARGED CONDUCTOR.
YOU MUST MAINTAIN A CLEARANCE OF AT
LEAST TEN (10) FEET BETWEEN ANY PART
OF THIS MACHINE OR ITS LOAD AND ANY
ELECTRICAL LINE OR APARATUS CARRYING UP
TO 50,000 VOLTS. ONE FOOT OF ADDITIONAL
CLEARANCE IS REQUIRED FOR EVERY
ADDITIONAL 30,000 VOLTS OR LESS.
90739
90719
8765
90716
8402
(Both Sides)
(Both Sides)
(Both Sides)
7155
7
11
9
2
4
5
16
12
10
13
14
15
8
1
3
To Next Page
Loading...
