Page 30 Mast Series - Operator’s Manual
April 2021Section 9 - Transport and Lifting Instructions
Crane Lifting Instructions
Only qualified riggers should rig and lift the machine.
Ensure that the crane, loading surfaces, spreader bars, cables, chains
and straps are of sufficient capacity to withstand the machine weight.
See the serial plate for the machine weight.
Fully lower the platform. Be sure the extension deck, control box and component trays are secure.
Remove all loose items on the machine.
Make sure the platform and chassis E-stops are depressed.
Use the lifting eye mounted on the rear mast column.
Make sure the mast is fully lowered.
Inspect the entire machine and remove any loose or unsecured items.
Adjust the rigging to prevent damage to the machine.
Lift the machine slowly to prevent rocking.
To Next Page
Loading...
