800-797-4632 . mecoutdoors.com
2
SMART SERIES
Clay Target Machine Electrics
Thank you for purchasing the Smart Series Electrics from MEC Outdoors! These modules are
designed to eliminate electronic component failures in the eld. Machines equipped with the
new Smart Series Electrics are extremely user friendly and packed full of useful features! With
the push of a button, you can view the machines life cycle target count, resettable target count,
current battery level, and machine status. These modules have built in parameters to notify the
user of any critical machine issues. In the event of a machine malfunction, a specic code will
light up on the screen providing information as to what failed. A full listing of all the fault codes
can be found on pages 5 & 6 of this manual. We put the Smart Series Electrics through a vigor-
ous testing cycle and have proven that they are built to work in any climate!
To make your clay target machine is safe for the operator and those around, we recommend you
follow these basic safety guidelines before conducting any functions on your machine:
SMART TECHNOLOGY
A WORD ABOUT SAFETY
Displays the current status of the clay
target machine.
Easily toggle through functions and check
how many targets have been thrown.
-- Never make any adjustments unless the machine is disarmed and the battery is disconnected.
-- Never load targets unless the machine is disarmed and the battery is disconnected.
-- Never move or reposition unless the machine is disarmed and battery disconnected.
-- Always stand behind the machine at a safe distance when operating.
-- Always read and follow all operating instructions prior to using the clay target machine.
FEATURES:
• Target counter along with resettable counter to track
machine usage by each clay target thrown.
• Fault codes will be displayed if the trap has a
malfunction.
• Built in Battery Voltage Readout: Machine will
automatically turn o when voltage drops below 10V
to prevent machine damage.
• IP67 waterproof rating.
• Reverse Polarity Protection
• Electronics enclosed in Noryl resin.
• Tested in extreme hot, cold, and wet environments.
• Board can quickly be replaced in the event of
a malfunction and is a covered item within the
machine’s warranty period.
To Next Page
Loading...
Need help?
General
