Troubleshooting
21
Additional troubleshooting information:
• Reset your FineTuner Echo when you suspect a malfunction of the device. To reset
the FineTuner Echo, proceed as follows:
1. Remove the battery.
2. Press 3 keys simultaneously, i.e. 1 key in row 1, 1 key in row 2 and 1 key in row 4,
for example , and . Keep the keys pressed until the indicator light of
the FineTuner Echo goes on and off again.
3. Reinsert the battery.
• If you/the recipient have used the (telecoil) or (microphone and telecoil)
settings and are unable to return to the (microphone) signal source input with
the FineTuner Echo, you need to switch the audio processor off and on again.
When the audio processor is switched on again it will automatically start with the
(microphone) setting activated.
• If you press or for more than 3 seconds, your FineTuner Echo and the
respective audio processor will be unpaired. Repeat the pairing process described in
chapter FineTuner Echo, Using the FineTuner Echo for the rst time.
• If the screen of your FineTuner Echo appears “cluttered”, e.g., due to remaining
display fragments, lock and unlock the FineTuner Echo to clear the display. Weak
batteries or cold temperatures, i.e., when the FineTuner Echo is below its operating
temperature range, can also lead to slow reaction of the screen and the display
may appear “cluttered”.
To Next Page
Loading...
