18
3. You can press the [PAGE +] / [PAGE -] button to select the function
menu and use the [+] / [-] button to adjust the parameter value.
The Setting description of drum module, as follows:
Parameter
L-R EXCH
LOCAL
GM MODE
AUTO POWER
Value
R/L
ON/OFF
ON/OFF
30, 60 ,OFF
Description
Exchange the left and right pad position.
R: Normal settings.
L: You can exchange the left and right pad
position to satisfy the left-hand player.
Specifies whether the pad signal will be
connected to the internal sequencer or
disconnected from the internal sound
generator.
ON: The pads and internal sequencer are
connected to the digital drum’s internal
sound generator. Sounds are produced by
the internal sound generator when the
pads are struck.
OFF: The pads and internal sequencer
are disconnected from the digital drum’s
internal sound generator. Striking the pads
does not cause sound to be produced by
the internal sound generator.
ON: The channel 10 will respond GM
drum kit.
OFF: The channel 10 will respond local
drum kit.
Factory settings, approximately 30
minutes.
30: Automatically turns the power off if no
operation for approximately 30 minutes.
60: Automatically turns the power off if no
operation for approximately 60 minutes.
OFF: The power will not power off auto-
matically.
Utility Mode (UTILITY)
To Next Page
Loading...
