Medeli mc37 User Manual

Using MIDI
For two MIDI instruments to be comm-
unicated, they must be connected
with MIDI cables. In a basic example,
the MIDI OUT terminals of this key-
board could be connected to the MIDI
OUT terminals of a sequencer, allow-
ing you to record and play back the
performance data from this keyboard.
The keyboard can send out several
types of MIDI messages (such as：
PROGRAM CHANGE and NOTE).
Please refer to the MIDI I
Chart on page 21.
Press [function] until CH displays.
The last two figures are the current
MIDI CH value. Select the channel for
MIDI transmission by pressing [+] or [-
]. The selection range is 01- 16, and
the default value is 01. Once the
connec-tion is made, the keyboard's
MIDI data will be sent automatically as
you play.
An all-note-off message will be sent
out whenever there is a Transpose,
a midi channel change or when a
mplemen-
tation
" "
MIDI OUT
Connecting with Externa Device
2.
3.
4.
1.
2.
3.
1.
Note:
Your PC should be equipped with a
sound card, a pair of speakers and
the MIDI software must be installed.
No information of Auto-Style, Pre-re-
corded songs, Sustain and Transpose
could be sent as MIDI data.
1.
2.
Your keyboard includes the MIDI fea-
ture. (Musical Instrument Digital Inter-
face) MIDI is the universal standard for
sending and receiving performance
data between electronic musical instru-
ments.
Using MIDI, you can play music on
your keyboard and another instrument
simultaneously while pressing the keys
on only one. Record your music to a
sequencer, acquire a wider selection
of preset tones from a sound module.
Every MIDI equipped instrument has a
MIDI OUT terminal, and some also
have a MIDI IN and a MIDI THRU
terminal. Each of these terminals
serves in different purposes. MIDI
OUT sends MIDI data to ( talks to )
other MIDI instruments.
This keyboard has a MIDI OUT term-
inal. Please refer to the following instr-
uctions.
" "
Switch both the keyboard and PC off.
Connect the keyboard and PC with a
MIDI adaptor (one end with 5-pin plug
and the other end with 15-pin plug).
Switch on both keyboard and PC
again, make sure the volume is mini-
mized by pressing [ master vol].
Connecting with PC (Personal
Computer)
MIDI Cable
Sound Ca rd
with MI DI port
Joy stick/MI DI port
Plug MI DI cable into this
port on the sound card
Computer
(rear view)
MIDI OU T port
Plug MI DI Ca ble
into this port
16

Medeli mc37 Specifications

General

Brand	Medeli
Model	mc37
Category	Electronic Keyboard
Language	English