RX8000 Integrated Receiver/Decoders
1553-FGB 101 759 Uen K
www.mediakind.com
• Name – This field allows a descriptive name to be assigned to
the IRD. The default name is the IRD model name.
• Product Name – The model of the product.
• Unit Chassis Ident – This is a unique identity value that
matches the label printed on the side of the device chassis.
• Build/Environment/Network Settings/Modules/Trap Destination
Table – These buttons access sub-menu pages, described
below.
Date and Time
•
Current Time – The current time reported is taken from the
following (in priority order):
- TDT (DVB) or STT (ATSC) extracted from the input
Transport Stream
- NTP server
- Internal time with epoch of “2000-01-01 00:00:00”
• Uptime – The elapsed time since power-up.
Front Panel LockOut
•
Front Panel Lockout On/Off – Indicates whether the front
panel controls are active or inactive.
Front Panel Control
•
Disable Idle Menu Screen Saver – Disables the front panel
screen saver. The screen saver is activated if there is no
navigation activity for more than 5 minutes.
• Flash the front panel LED(20 mins duration) – If set On,
the front panel LED will flash on and off for approximately 20
minutes before resuming normal operation. This can be used to
locate a particular unit if many IRDs are co-located.
Reboot Device
•
Reboot Unit – Selecting this button will perform a hardware
reset of the IRD.
Reset Parameters to their Factory Default values
•
Reset Parameters to Factory Defaults – Selecting this
button will set all parameters to their factory default values
(except for the network IP parameters e.g. IP address and
subnet mask) and perform a hardware reset of the IRD.
Flush Quality Logs storage
•
Flush all Quality Logs – Selecting this button will flush all the
quality logs.
A number of further web pages are accessible from the Device Info page and these are described in
the following paragraphs.
3.9.2.1. Device Info > Build
This page gives details of the build and version information for the equipment. There are no fields on
this page that may be edited by the user.
To Next Page
