User Manual Thermal Unit TES Valida
Page 18 Rev. 04(12/2013)
Medite GmbH
.
Wollenweberstr. 12
.
31303 Burgdorf
.
Germany
Phone +49 5136 88 84 0
.
Fax +49 5136 88 84 55
.
info@medite.de
.
www.medite.de
7 Cleaning, Maintenance and Recycling
7.1 Cleaning
The surfaces of the TES Valida™ and its Thermal Unit can be cleaned with commercial, non
scratching detergents. For safety reasons, the mains plug must be pulled before cleaning the
instrument. Furthermore, working at the instrument is only allowed after cooling down of its heated
parts (danger of burning!).
Clean the instrument after every use to ensure long, trouble-free usage.
7.2 Maintenance
Maintenance of the instrument includes the cleaning of the ventilation slots to make sure that the
chamber is continuously ventilated, and to prohibit overheating. We recommend maintenance at least
once a year.
For safety reasons, the mains plug must be pulled before doing maintenance work at the instrument.
Furthermore, working at the instrument is only allowed after cooling down of its heated parts (danger
of burning!).
7.3 Recycling
At the end of operating life of the TES Valida™ Thermal Unit, please arrange proper recycling.
Medite® is prepared to arrange such proper recycling against payment for the disposal fee.
Do not expose the instrument to regular domestic or industry waste. It contains
electrical parts that can be dangerous to the environment!
To Next Page