User Manual Thermal Unit TES Valida
Page 6 Rev. 04(12/2013)
Medite GmbH
.
Wollenweberstr. 12
.
31303 Burgdorf
.
Germany
Phone +49 5136 88 84 0
.
Fax +49 5136 88 84 55
.
info@medite.de
.
www.medite.de
1.2 Important Information
1.2.1 About this Manual
This manual shall help you handling the device. Please read the manual completely and follow the
advice. Acquaint yourself to the control elements and their functionality by studying the figures. This
way, an adequate use of the device is ensured.
The device present is offered with two different power supply variations. Please check the tool
identification plate to make sure that the device’s power supply matches your local power supply.
Different power supply variations mean no difference in handling and functionality of the device.
1.2.2 Used symbols and their meanings
Digits (1)
1.3 Intended Use
The TES Valida™ is made for the purpose of embedding tissue specimens in histology and pathology
laboratories. Processing of food is not permissible.
The conditions for operation, maintenance and service mentioned in this instruction manual have to be
strictly observed.
1.4 Authorized Operators
The TES Valida™ must be used only by those persons who have been authorized by the owner. In his
working area, the operator is responsible with regard to third persons. The owner must give the
operator access to this instruction manual and make sure that the operator has read and understood
its contents.
Danger warning: Danger warnings are marked by a red framed triangle.
Warning: Warnings are marked with a yellow warning triangle.
Notice: Notices, meaning important information for the user, that are not classified as
danger or warning, are marked with an information symbol.
Digits in brackets refer to item numbers in figures.
Heat warning: Heat warnings identify parts and situations of the device with high
temperatures.
To Next Page
Loading...