MediWorks S360 - S360 Installation

Slit Lamp Microscope USER MANUAL
15 / 29
15
Digital Module Set (for S390L)
1
Diagram34
Table 1
Figures:
2.2 S360 installation procedure
1． Open the carton, take out the tools like
screw driver and spanner.
2． Remove the three screws from metal plate
the screw driver (Fig.2.1.4), take out the
headrest from carton（Fig.2.1.2）， ensure
the three hole on head rest aim the screw
hole of instrument table, re-tighten the
previously removed screw and make
head-rest connect with metal plate.(Fig.
2.2.1)
Fig. 2.1.5
Fig.2.1.1
Fig.2.1.3
Fig.2.1.4
Fig.2.1.6
Fig.2.1.7
Fig.2.1.2