MediWorks S360 - Indicator Light; Instrument Installation

Slit Lamp Microscope USER MANUAL
8 / 29
1
Manufacturer/ supplier
Shanghai MediWorks Precision Instruments Co., Ltd
2
Figure /icon/ mark
Detail in table one
3
Connect to main power
Detail in power specification
4
Power frequency, Hz
Detail in power specification
5
Input power frequency
Detail in power specification
6
Network output power
N/A
7
Classification
Detail in table one item 1
8
Working time
No indication, work continuously
9
Output
Detail in table one item 8
10
Physiological reaction
No indication. N/A
11
AP/AGP type device
No indication. N/A
12
High pressure terminal
device
No indication. N/A
13
Cooling condition
No indication. N/A
14
Mechanical stability
No indication. Detail in General Requirements for Safety item
12.
15
Protective packing
Transportation marks required by <EN ISO 780-1997
packing-handling icon marks> are affixed to the outer
packing carton, which includes up, fragile, afraid of the rain,
stacking Limit, stacking weight limit and so on.
1.2 Indicator Light
The power switch is designed with indicator light. When the light is blue, it means the power is on and
the instrument is working.
1.3 Product Technical Specifications
Please refer to "General Description".
2 Installation of the instrument and working condition
Slit lamps are network powered medical instrument. Please check pert the checking list after
opening the carton and install the instrument according to this user manual. Test and ensure the
instrument operating well before putting to use.
2.1 Replacements of consumables
Detail in Chapter 5 of this manual.