35
• Do not wear loose-tting clothes, jewellery, or watches etc. that can fasten in moving parts.
• Wear a hair net if you have long hair.
• The instructions and safety instructions do not cover all situations that can arise.
• Follow all the instructions and safety instructions when working with the tool, to reduce the risk of electric shock,
personal injury and material damage etc.
Electrical connection
• On delivery the electric motor is ready to use and complies with the applicable standards.
• The mains supply and extension cords at the point of use must also comply with these standards.
• Electrical connections and other electrical work must only be carried out by an authorised electrician.
• IMPORTANT: The electric motor is intended for duty cycle S1.
• The motor switches o automatically if the tool overheats. The motor can be restarted once it has cooled.
• Regularly check all electrical connections and power cords for damage.
• Power cords must comply with local regulations and be marked HO7RN.
• Extension cords up to 25 m must have a wire cross section of at least 1.5 mm², and extension cords longer than 25
m a wire cross section of at least 2.5 mm².
• The mains connection must be fused with a 16 A delayed action fuse.
Symbols
WARNING:
Disconnect the machine from the
mains supply before cleaning, service,
or replacing saw blades.
Read the operating instructions carefully
before use.
Wear safety gloves when working with
large workpieces.
Wear safety glasses. Approved as per applicable directives.
Use ear protection. Recycle discarded product.
Wear a face mask.
To Next Page
Loading...
