Meec tools 240-149 - Technical Data; Technical Specifications; Vibration Warning

EN
3636
TECHNICAL DATA
Rated voltage 230 V
~
50 Hz
Output 250W
Sawing speed 880 m/min
Saw blade length 1400 mm
Saw blade width 3.5/12 mm
Max sawing width 200 mm
Max sawing height 80 mm
Dimension of saw table 300 x 300 mm
Height to top of table 310 mm
Angular adjustment of saw table -5° – +45°
Vacuum connection Ø 35 mm (internal) / Ø 40 mm (external)
Dimensions 480 x 720 x 440 mm
Weight 16 kg
Sound pressure level (no load), LpA 64 dB(A), K=3 dB
Sound pressure level (load), LpA 82 dB(A), K=3 dB
Sound power level (no load), LwA 74 dB(A), K=3 dB
Sound power level (load), LwA 93 dB(A), K=3 dB
Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used to compare dierent tools with each other
and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using power tools may dier from the specied maximum value, depending on how the tool is
used. It is therefore necessary to determine which safety precautions are required to protect the user, based on an estimate of exposure in actual
operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched o and when it is idling, in addition
to the start-up time).