ENGLISH
84
Filling the oil
1. Place the saw on a level surface.
2. Clean the area round the oil filler cap (12)
and open the cap.
3. Pour chain oil into the tank. Make sure that
no dirt gets into the oil tank as this can clog
the nozzle.
4. Close the oil filler cap (12).
USE
Adjusting the length of the telescopic shaft
WARNING: Unplug the power cord before checking and adjusting.
• Open the telescopic lock (6) and pull out the grip from the casing.
• Fit the shaft and adjust to the required length.
To Next Page
Loading...